Milwaukee 4203

Milwaukee 4203 Adjustable Position Electromagnetic Drill Press Base Milwaukee 4203. The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11-inch drill travel. Adjustable position on this base makes lining up the bit easier and faster. Feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2-inch and thicker. Includes base only. Volts: 120, Amps: 12.5, Dimensions L x Milwaukee 4203 W x H (in.): 11 x 4 1/4 x 17 1/4 drill travel U.S.A 11-inch drill travel Limited warranty, 30-day no-risk trial . » Read more...

PRICE: » Check Price.

Milwaukee 6230

Milwaukee 6230 Deep Cut 6 Amp Portable Band Saw Milwaukee 6230. Milwaukee's Deep Cut Portable Band Saws have a cutting capacity of 4-3/4 in. x 4-3/4 in. With high torque and powerful motor this band saw will maintain a steady, optimum blade speed. The excellent balance, high visibility and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life. No oiling is needed. No oiling is needed. With high Milwaukee 6230 torque and powerful motor this band saw will maintain a steady, optimum blade speed Using an all ball and roller bearing construction, and worm gear and chain drive mechanism this tool is built to last Cuts up to 4-3/4-by-4-3/4-inches in rectangular stock and 4-3/4-inches in round stock Limited warranty, 30-day no-risk trial . » Read more...

PRICE: » Check Price.

Milwaukee 2601-20

Bare-Tool Milwaukee 2601-20 M18 18-Volt Compact Driver/Drill (Tool Only, No Battery) Milwaukee 2601-20. This drill came with the 5 tool kit that i bought a couple years ago from home depot. The other tools have been great, except that the impact driver seems a little under-powered compared to similar brands. This compact drill may be fine for home use, but is not built to the same quality of the rest of the M18 line and I would not recommend for any serious work. The motor would overheat easily with paddle bits of any size, and recently the motor failed after two holes with a fresh 2" hole saw (which this ... The Milwaukee 2601-20 Milwaukee M18 Compact Drill Driver has been built to withstand tough jobsite conditions Max Torque (in.-lbs.): 400, Volts: 18, Speed - No Load (RPM): 0 - 350 / 0 - 1400, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 7 3/4, Tool Weight (lbs.): 4 Compact Length (7-3/4 in.) fits in tight areas Built-in LED light illuminates work surfaces. Lightweight 3.1 lbs. . » Read more...

PRICE: » Check Price.

Milwaukee 49-57-2000

Milwaukee 49-57-2000 Steel Hawg 2-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter Milwaukee 49-57-2000. The product was exactly as advertised but it took almost a week and a half to receive it. I run my own tool site for different tools and I ship the same day - why can't they speed up the process?!See all 1 customer reviews... Available in sizes up to 6 inch diameter 3 Morse Taper Arbor Assembly 49-57-0010 3 Morse Taper Arbor Milwaukee 49-57-2000 (49-57-0010) for use with Milwaukee Drill Stand 4292-1 For use with No. 3 Morse Taper Arbor Assembly 49-57-0010 Metric thread size M18 x 1.5 shank . » Read more...

PRICE: » Check Price.

Milwaukee 2611-84

Factory-Reconditioned Milwaukee 2611-84 18V Cordless M18 High Performance Hammer Drill Kit Milwaukee 2611-84. This is by far the best drill I've used. In the past I've used Hitachi, Dewalt, Rigid, Porter Cable(worst drill there is), and Mikita. But from now on I'm going with Milwaulkie. Especially this drill. The power is unmatched to anything I've owned. And the fact that it recon. scared me a little. Not to mention the risk of ordering online. But I have to admitt I'm impressed with the preformance of this drill. When they mean high preformance, they mean it. I use this drill every day. The batteries last long. The torque is great. I'll never go back ... At only 91/4" long and 5.3 lbs, it is the most compact high performance hammer drill available, which minimizes user fatigue and maximizes productivity by fitting into tight spaces Features: 18V XC High Capacity LITHIUM-ION battery delivers longer life and run-time Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time ½" single-sleeve ratcheting metal chuck with carbide jaws On-board Battery Fuel Gauge displays remaining run-time Built-in LED Light illuminates work surface Variable speed trigger Specifications: Voltage 18V Torque 650 in-lbs RPM High 0-1,800 RPM Low 0-450 BPM 0-28,000 No of Batteries Included (2) 18V XC LITHIUM-ION Batteries - 48-11-1828 Battery LITHIUM-ION Length 9-1/4" Tool Weight 5.3 lbs Shipping Weight 13.25 lbs Milwaukee 2611-84 Size 9-1/4" What's In The Box: Milwaukee 2611R M18 18-Volt Cordless Hammer Drill Driver Two 18V XC LITHIUM-ION Batteries - 48-11-1828 18V Charger - 48-59-1801 Side Handle Carrying Case Utilizing the new 18V XC High Capacity LITHIUM-ION battery, the 2611 delivers up to 65% more holes per charge 1/2-Inch single-sleeve ratcheting metal chuck with carbide jaws This factory-reconditioned model is the same as the new model 2611-24 . » Read more...

PRICE: » Check Price.

Milwaukee 48-28-4006

Milwaukee 48-28-4006 12-Inch Hex Shank Extensions for Selfeed Bits, Auger Bits and Hole Saws Over 1 Milwaukee 48-28-4006. perfect extention ,had to drill through 14 inches of wood with 2 inch selfeed bit attached, worked great,product was shipped and recieved it in a few days1 of 1 people found the following review helpful. The 7/16 hex fits both 3 jawed chucks, 1/2" drill capacity and larger, as well as 7/16" quick change chucks. The Quick change shank is 7/16" hex 7/16" hex shank 12" in length For selfeed bits, auger bits and hole saw 1" Milwaukee 48-28-4006 diameter and larger with 7/16" shankExtend your reach a full 12" when drilling with Milwaukee Selfeed bits, auger bits and hole saws Also fits 7/16 inch Quick Change chucks Fits 3-jawed chucks (1/2-inch drill capacity and larger) and 7/16-inch quick change chucks . » Read more...

PRICE: » Check Price.

Milwaukee 2650-22

Milwaukee 2650-22 18-Volt Extra-Compact Impact Driver Kit Milwaukee 2650-22. This is a good strong tool. I love being able to check the battery status by simply pressing a button,but I have noticed that the M18 tools continue operating for a while after the last battery light goes off.My biggest complaint is that the trigger control is fair to poor (I cannot net near rpm) A good impact driver must have good trigger control,otherwise it is too easy to strip screws. With the 2.6 ah battery this tool is a tad teavy,with the flat battery it is just right.The person who gave the negative review on this tool,should give ... Cordless: Yes, Max The 1/4in hex quick-change chuck allows for easy bit changes while a variable-speed trigger provides increased user control Belt clip allows for easy portability, Built-in LED light illuminates work surface and On-board battery fuel gauge displays remaining Milwaukee 2650-22 run-time ¼? Hex quick change allows for easy bit changes . » Read more...

PRICE: » Check Price.

Milwaukee 2410-82

Factory-Reconditioned Milwaukee 2410-82 M12 12-Volt Cordless 3/8-Inch Driver/Drill Kit Milwaukee 2410-82. I bought this drill after my second old wonderful 9.6 volt Makita, which is no longer made, finally died. I chose this Milwaukee based on several excellent reviews on independent sites, viewing with caution one comment that says the drill bit can fall out. This tool is VERY light. Even lighter than expected. Amazingly so. And there is no wobble at all in the bit. So far so good. But what is it with the bit falling out? I am up on a ladder, outside, with the bit racheted in very ... Some products may contain cosmetic blemishes Milwaukee 2410-82 This is a factory reconditioned product Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition 2-speed (0 to 1,500 and 0 to 400) all-metal gear box Lightweight and compact at only 2.5 pounds and 7-3/8-inch . » Read more...

PRICE: » Check Price.

Milwaukee 0726-20

Bare-Tool Milwaukee 0726-20 M28 28-Volt 1/2-Inch Hammer Drill (Tool Only, No Battery) Milwaukee 0726-20. I bought the 28 volt hammer drill and saw when they first came out 4 or 5 years ago. Last fall I was in Haiti working and I loaned it to a local and he dropped it and cracked the housing. I bought this bare tool to get back up to speed and it has performed wonderfully. It does have more plastic parts than the original but it is still a beast, love it. Drives lags and long screws with no trouble into real 2x4 that were over 100 years old in a recent renovation that I was doing, my ... 2 Phillips Bit, Tool Only - Battery and Charger Sold Separately Includes M28 Cordless 28 Volt 1/2-in Hammer Drill (Tool Only) - 0726-20, Side Handle, No Length 9-1/4", Tool Weight 4.4 lbs Includes: M28 Cordless 28 Volt 1/2 in. Hammer-Drill -Bare Milwaukee 0726-20 Tool Only (No battery or charger), Side Handle, No. 2 Phillips Bit . » Read more...

PRICE: » Check Price.

Milwaukee 6122-30

Milwaukee 6122-30 4-1/2-Inch Trigger Grip Small Angle Grinder Milwaukee 6122-30. The first time I used this grinder I ran it for about 6 straight hours stripping paint on round log siding (with a Norton Rapid Strip disc - awesome combo), then another 4 hrs the next day. Saved me big $$ vs. sandblasting. Also does a better job on my mower blades than I can get on my bench grinder. Anyway, it's handled everything I've thrown at it without hesitation. It has enough power to handle most jobs (not the case with the inexpensive Ryobi I had for a day) and the trigger grip configuration is ... External brush doors reduce service time The trigger grip handle with lock on increases productivity by providing optimal control, reach, and leverage for Milwaukee 6122-30 a variety of applications Milwaukee's built in advanced airflow system, including debris baffles and multiport exhaust, extends tool life Soft grip three-position handle provides optimal control during various applications Trigger grip handle; provides better control, reach and leverage . » Read more...

PRICE: » Check Price.

Milwaukee 9565

MILWAUKEE 1 Ton Electric Chain Hoist 10 FT Model 9565 Milwaukee 9565. With 1/2 to 2 Ton capacities Milwaukee 9565 and 10 ft All offer a multi-disc magnetic brake for positive load holding and spotting to 20 ft Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels Larger and improved carbon brush material for longer tool life . » Read more...

PRICE: » Check Price.

Milwaukee 9075-20

Milwaukee 9075-20 7 Amp 3/4-Inch Impact Wrench Milwaukee 9075-20. Delivering a whopping 380 ft. lbs. of torque and weighing only 6.2 pounds, this Impact Wrench has a fantastic power to weight ratio. The 3/4-inch square anvil is more resistant to long term fatigue than a 1/2-inch anvil. The powerful 7.0 amp motor drives a unique impact mechanism at 1750 RPM (no load). This model features a pin-detent system to securely retain sockets or adapters and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism ... Milwaukee's line of Milwaukee 9075-20 impact wrenches offers power, performance, and durability in the convenience of a small package This compact tool is packed with punch and delivers superior performance when compared to the competition Cordless: No, Max Limited warranty Powerful 7.0 amp motor, 1750 RPM and 2500 IPM (no load) . » Read more...

PRICE: » Check Price.

Milwaukee 6130-33

Milwaukee 6130-33 7 Amp 4-1/2-Inch Small Angle Grinder Milwaukee 6130-33. Bought this grinder to replace a Craftsman that died during a major tile job. Loaded my DeWalt 4" diamond blade and immediately noticed how sloppy the spindle nut assembly was. Carefully attempted to center the wheel adapter to the keyed shaft, however at 10000 rpm, "eyeballing" wheel fitment, rather than relying on a properly machined assembly, doesn't cut it. Needless to say, the diamond wheel vibrated/oscillated like a SOB, chipping the porcelain tile with every cope or trim. Returned the product the next day, and bought the vastly superior Makita 7.4 amp grinder, which is truly a precision instrument. ... Includes 4.5-in 7 Amp Small Angle Grinder with Slide Switch - 6130-833, Type 27 Tool-Free Burst-Resistant Guard, Spanner Wrench Burst Resistant Guard: Yes, Tool Free Guard: Milwaukee 6130-33 Yes, Cord Type: Double Insulated, Cord Length: 8' Includes: 6130, 4-1/2" type 27 Grinding Wheel, Type 27 Guard, Spanner Wrench . » Read more...

PRICE: » Check Price.

Milwaukee 48-20-5055

Milwaukee 48-20-5055 4-Inch Core Bit Milwaukee 48-20-5055. I have various sizes of the Milwaukee thin wall core bits, and just ordered the 4 inch I have never had a need for the 4 inch until now, and the price here on Amazon is the best I have found by 50 dollars less than local prices here. I have most other sizes to 6 inch, they do a good job I have some bits that I bought in 1992 still working fine, I use them to install 90 plus effieiency furnace flu pipe thru 8 in concrete walls where a basement installation is done, electrical conduit ... Thin wall Thin Wall Core Bits are available from 1 inch to 6 inch diameters The Thick Wall construction is ideal for larger hammers and more seasoned/cured Milwaukee 48-20-5055 concrete Thin wall Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.) . » Read more...

PRICE: » Check Price.

Milwaukee 4204-1

Milwaukee 4204-1 7.2 Amp Electromagnetic Drill Press with 1/2-Inch Motor and Chuck Milwaukee 4204-1. Although this tool is some what limited in use it performs excellent for the purpose it was designed for. I have used this tool to drill and tap many holes in machine bases and bolster plates that were too large or could not be moved to a drill press. With a good lay out job and heavy center punch you can accurately place the Mag Drill on center each time. The base of the tool is also a de-magnetizer for easy removal of chips and clean up.1 of 1 people found the following review helpful. -Voltage: 120.00 VAC -For Milwaukee 4204-1 any flat ferrous material 1/2'' and thicker -Motor/magnet interlock 600 RPM no load speed 1/2" drill capacity . » Read more...

PRICE: » Check Price.